Mill-Right® N, ES & V Oil Seals
Breakthrough anti-abrasion and anti-wear properties for extended service life; improved chemical resistance through the entire range of elastomers; available in all elastomeric KLOZURE® Oil Seal designs.
|
Min. Shaft Dia. |
Max. Shaft Dia. |
Spring Configuration |
||||
| Heavy-duty metal case; low speed service; assembled design. |
3″ |
50″ |
— — |
To 7 psi |
— — |
|
| Radial lip seal technology in an excluder seal; excels in environments containing heavy contamination and wash down. |
17″ |
75.75″ |
— — |
— — |
— — |
|
| Radial lip seal technology in an excluder seal; excels in environments containing heavy contamination and wash down. |
17″ |
75.75″ |
— — |
— — |
— — |
|
| Reinforced rubber OD; ideal for low speed applications; includes a Stainless Steel Garter spring; cover plate required. |
3″ |
— — |
— — |
— — |
— — |
|
| Protected Garter spring to avoid dislodging; reverse bevel lip to prevent lip rollover; includes a Stainless Steel Garter spring; reinforced rubber OD; excels in environments where corrosion is typically a problem; cove plate required. |
3″ |
— — |
— — |
— — |
— — |
|
| Protected Garter spring to avoid dislodging; supplementary dust lip provides greater protection from foreign bodies that can deteriorate the main lip; includes a Stainless Steel Garter spring; reverse bevel lip to prevent lip rollover; reinforced rubber OD; cover plate required. |
3″ |
— — |
— — |
— — |
— — |
|
| General purpose seal; solid or split design. Reverse bevel lip design prevents lip rollover; reinforced rubber OD; single and dual lip configurations available. |
0.750″ |
60″ |
0.015 @ 1000 0.010 @ 2000 0.008 @ 500 |
To 7 psi |
Molded-in Stainless Steel Finger |
|
| Reverse bevel lip design prevents lip rollover; reinforced rubber OD; single and dual lip configurations available. |
0.750″ |
60″ |
5000 fpm |
— — |
— — |
|
| General purpose seal for high misalignment applications. Low-speed service; increased misalignment capability over standard 26. |
1″ |
50″ |
Application Dependent |
To 7 psi |
Molded-in Carbon Steel Garter |
|
| General purpose seal; solid or split design. |
0.750″ |
60″ |
0.010 |
To 7 psi |
Molded-in Stainless Steel Finger |
|
| General purpose dual lip seal. |
0.750″ |
60″ |
0.015 @ 1000 0.010 @ 2000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose assembled seal. Heavy-duty metal outer case; single and dual lip configurations available. |
3″ |
90″ |
0.015 @ 1000 0.010 @ 2000 0.005 @ 3000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. Heavy-duty metal outer case; felt extruder. |
3″ |
15″ |
0.010 @ 1000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. GYLON excluder lip for non-lubricated external conditions or corrosive external conditions. |
3″ |
40″ |
0.010 @ 1500 |
To 7 psi |
Stainless Steel Finger |
|
| General Purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in one element only. |
3″ |
15″ |
0.015 @ 1000 0.010 @ 2000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in both elements. |
3″ |
15″ |
0.010 @ 500 0.005 @ 1000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. Lips set in tandem configuration; used for retention and exclusion, spring in both elements. |
3″ |
15″ |
0.010 @ 500 0.005 @ 1000 |
To 7 psi |
Stainless Steel Finger |
|
| Special purposes assembled seal. |
2.375″ |
8″ |
N/A |
To 50 psi |
Stainless Steel Finger |
|
| General purpose seal. Metal reinforced rubber OD; reverse bevel lip design prevents lip rollover; available in single and dual lip configurations; Ideal for slow-speed service applications such as continuous casters. |
2″ |
12″ |
0.015 @ 500 |
To 50 psi |
Stainless Steel Finger |
|
| High-temperature, general purpose assembled seal. Heavy-duty metal outer case;THERMO-CERAM. |
2″ |
12″ |
0.015 @ 500 |
Ambient |
None |
|
| Severe service assembled seal. Heavy duty metal outer case; reverse bevel lip design prevents lip rollover; aggressive shaft to bore misalignment capability. |
6″ |
90″ |
0.090 @ 5000 |
To 50 psi |
Molded Stainless Steel Finger |
|
| Severe service dual lip assembled seal. GYLON excluder lip for non-lubricated external conditions or corrosive external conditions. |
6″ |
40″ |
0.010 in |
To 7 psi |
Molded-in Stainless Steel Finger |
|
| General purpose assembled seal for high pressure applications. |
0.438″ |
20″ |
0.005 @ 2000 |
150 psi |
None |
|
| Assembled seal; solid design. Low speed service; excellent chemical resistance. |
0.437″ |
20″ |
0.500 @ 2000 |
To 7 psi |
Carbon Steel Garter |
|
| General purpose assembled seal. |
0.250″ |
3″ |
0.015 @ 1000 0.010 @ 2000 0.005 @ 3000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. Felt excluder. |
0.250″ |
3″ |
0.010 @ 1000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. GYLON excluder lip for non-lubricated external conditions or corrosive external conditions. |
0.250″ |
3″ |
0.010 in fpm |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in one element only. |
0.250″ |
3″ |
0.015 @ 1000 0.010 @ 2000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in both elements. |
0.0250″ |
3″ |
0.010 @ 500 0.005 @ 1000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. Lips set in tandem configuration; used for retention and exclusion; spring in both elements. |
0.0250″ |
3″ |
0.010 @ 500 0.005 @ 1000 |
To 7 psi |
Stainless Steel Finger |
|
| General purpose dual lip seal. Non-sprung front lip serves as a baffle; lips set in tandem configuration; used for retention and exclusion; spring in both elements. |
0.0250″ |
3″ |
0.010 @ 500 0.005 @ 1000 |
To 7 psi |
Stainless Steel Finger |
|
| Severe service assembled seal. Heavy-duty metal outer case; unique carrier/Garter spring combination; industry’s highest shaft to bore misalignment capability. |
8″ |
90″ |
0.125 @ 5000 0.093 @ 7000 |
To 7 psi |
Combination Stainless Steel Garter and Stainless Steel Finger |
|
| General purpose assembled seal. Heavy duty metal outer case; Garter spring construction. |
0.375″ |
7.875″ |
0.015 @ 1000 0.010 @ 2000 0.005 @ 3000 |
To 7 psi |
Carbon Steel Garter |
|
| General purpose dual lip seal. Lips set in tandem configuration; used for retention and exclusion; spring in both elements. |
0.375″ |
7.875″ |
0.010 @ 500 0.005 @ 1000 |
To 7 psi |
Carbon Steel Garter |
|
| General purpose assembled seal. Heavy duty lip construction. |
0.500″ |
3.250″ |
0.010 @ 500 0.005 @ 1000 |
To 7 psi |
Carbon Steel Garter |
|
| General purpose dual lip seal. Deal lips oppose for exclusion and retention; spring in both elements. |
0.500″ |
3.250″ |
0.010 @ 500 0.005 @ 1000 |
To 7 psi |
Garter |
|
| General purpose assembled seal. Heavy duty lip construction; Garter spring; filler ring construction for spring containment in sever conditions. |
0.500″ |
3.250″ |
0.010 @ 1000 |
To 7 psi |
Garter |
|
| General purpose bonded seal. No spring; ideal for grease retention or contamination exclusion. |
0.250″ |
7.250″ |
0.005 @ 1000 |
To 7 psi |
None |
|
| General purpose bonded seal. Metal outer case; Garter spring construction. |
0.250″ |
8″ |
0.015 @ 1000 |
To 7 psi |
Carbon Steel Garter |
|
| Sever service seal. Metal reinforced rubber OD; reverse bevel lip design prevents lip rollover; aggressive shaft to bore misalignment capability. |
6″ |
48″ |
0.100 @ 2500 0.500 @ 5000 |
To 7 psi |
Molded-in Carbon Steel Garter |
|
| Severe service seal. No spring; ideal for grease retention or contamination exclusion; reverse bevel lip design prevents lip rollover. |
6″ |
53″ |
0.050 @ 2500 0.025 @ 5000 |
To 7 psi |
None |
|
| Severe service seal. Aggressive shaft to bore misalignment capability; metal reinforced rubber OD for positive bore retention. |
6″ |
48″ |
0.050 @ 2500 0.025 @ 5000 |
To 7 psi |
Molded-in Carbon Steel Garter |
|
| Severe service seal. No spring; ideal for grease retention or contamination exclusion; reverse bevel lip design prevents lip rollover. |
6″ |
48″ |
0.025 @ 2500 0.012 @ 5000 |
To 7 psi |
None |
|
| General purpose bonded seal. No spring; ideal for grease retention or contamination exclusion. |
0.281″ |
5″ |
0.005 @ 1000 |
To 7 psi |
None |
|
| General purpose bonded seal. Metal outer case; garter spring construction. |
0.250″ |
12.5″ |
0.015 @ 1000 0.010 @ 2000 0.005 @ 3000 |
To 7 psi |
Carbon Steel Garter |
|
| General purpose bonded seal. Metal outer case; dual lip design; garter spring construction. |
0.438″ |
7.375″ |
0.015 @ 1000 0.010 @ 2000 0.005 @ 3000 |
To 7 psi |
Carbon Steel Garter |