Radial Lip
Oil Seals
Garlock radial lip and external oil seals in Mill-Right N, ES, and V elastomers: 46 KLOZURE models from 0.250 inch to 90 inch shafts, with pressure ratings to 150 psi and the industry's highest shaft to bore misalignment capability.
Garlock Mill-Right N, ES, and V oil seals bring breakthrough anti-abrasion and anti-wear properties for extended service life and improved chemical resistance through the entire range of elastomers. They are available in all elastomeric KLOZURE oil seal designs, from small bonded seals to 90 inch severe service assembled seals.
The tables below list every model with its description, shaft range, allowable misalignment and runout by surface speed, pressure rating, and spring configuration. Anchor Seals Inc. stocks a large selection ready to ship. Send us the shaft diameter, speed, housing bore, and service conditions and we will match the model.
Mill-Right N, ES, and V Oil Seal Models
Jump to a model family below. Misalignment and runout figures are in inches at the shaft surface speed shown. Scroll the tables on smaller screens.
Heavy Duty and Excluder Seals
Mill-Right heavy duty metal case and radial lip excluder seals for contaminated and wash down environments.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 111-L | Heavy-duty metal case; low speed service; assembled design. | 3″ to 50″Shaft Dia. | N/A | To 7 psi | N/A |
| Model 144W1 | Radial lip seal technology in an excluder seal; excels in environments containing heavy contamination and wash down. | 17″ to 75.75″Shaft Dia. | N/A | N/A | N/A |
| Model 144W2 | Radial lip seal technology in an excluder seal; excels in environments containing heavy contamination and wash down. | 17″ to 75.75″Shaft Dia. | N/A | N/A | N/A |
Reinforced Rubber OD Split Seals
Low speed split seals with Stainless Steel Garter springs. Cover plate required.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 151 | Reinforced rubber OD; ideal for low-speed applications; includes a Stainless Steel Garter spring; cover plate required. | 3″ min.Shaft Dia. | N/A | N/A | N/A |
| Model 154 | Protected Garter spring to avoid dislodging; reverse bevel lip to prevent lip rollover; includes a Stainless Steel Garter spring; reinforced rubber OD; excels in environments where corrosion is typically a problem; cover plate required. | 3″ min.Shaft Dia. | N/A | N/A | N/A |
| Model 154R1 | Protected Garter spring to avoid dislodging; supplementary dust lip provides greater protection from foreign bodies that can deteriorate the main lip; includes a Stainless Steel Garter spring; reverse bevel lip to prevent lip rollover; reinforced rubber OD; cover plate required. | 3″ min.Shaft Dia. | N/A | N/A | N/A |
Model 26 Series
General purpose solid or split seals with reverse bevel lip and reinforced rubber OD, 0.750 inch to 60 inch shafts.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 26 | General purpose seal; solid or split design. Reverse bevel lip design prevents lip rollover; reinforced rubber OD; single and dual lip configurations available. | 0.750″ to 60″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm0.008 @ 500 fpm | To 7 psi | Molded-in Stainless Steel Finger |
| Model 26-L | Reverse bevel lip design prevents lip rollover; reinforced rubber OD; single and dual lip configurations available. | 0.750″ to 60″Shaft Dia. | 5000 fpm | N/A | N/A |
| Model 26HR | General purpose seal for high misalignment applications. Low-speed service; increased misalignment capability over standard 26. | 1″ to 50″Shaft Dia. | Application dependent | To 7 psi | Molded-in Carbon Steel Garter |
| Model 26NS | General purpose seal; solid or split design. | 0.750″ to 60″Shaft Dia. | 0.010 | To 7 psi | Molded-in Stainless Steel Finger |
| Model 26R1 | General purpose dual lip seal. | 0.750″ to 60″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm | To 7 psi | Stainless Steel Finger |
Model 53 Series
Heavy duty metal case assembled seals in single and dual lip configurations, 3 inch to 90 inch shafts.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 53 | General purpose assembled seal. Heavy-duty metal outer case; single and dual lip configurations available. | 3″ to 90″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm0.005 @ 3000 fpm | To 7 psi | Stainless Steel Finger |
| Model 53F1 | General purpose dual lip seal. Heavy-duty metal outer case; felt excluder. | 3″ to 15″Shaft Dia. | 0.010 @ 1000 fpm | To 7 psi | Stainless Steel Finger |
| Model 53G1 | General purpose dual lip seal. GYLON excluder lip for non-lubricated external conditions or corrosive external conditions. | 3″ to 40″Shaft Dia. | 0.010 @ 1500 fpm | To 7 psi | Stainless Steel Finger |
| Model 53R1 | General purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in one element only. | 3″ to 15″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm | To 7 psi | Stainless Steel Finger |
| Model 53R2 | General purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in both elements. | 3″ to 15″Shaft Dia. | 0.010 @ 500 fpm0.005 @ 1000 fpm | To 7 psi | Stainless Steel Finger |
| Model 53T2 | General purpose dual lip seal. Lips set in tandem configuration; used for retention and exclusion; spring in both elements. | 3″ to 15″Shaft Dia. | 0.010 @ 500 fpm0.005 @ 1000 fpm | To 7 psi | Stainless Steel Finger |
Models 54 to 59
Special purpose, high temperature, and severe service assembled seals, with pressure ratings to 50 psi.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 54 | Special purpose assembled seal. | 2.375″ to 8″Shaft Dia. | N/A | To 50 psi | Stainless Steel Finger |
| Model 57 | General purpose seal. Metal reinforced rubber OD; reverse bevel lip design prevents lip rollover; available in single and dual lip configurations; ideal for slow-speed service applications such as continuous casters. | 2″ to 12″Shaft Dia. | 0.015 @ 500 fpm | To 50 psi | Stainless Steel Finger |
| Model 58 | High-temperature, general purpose assembled seal. Heavy-duty metal outer case; THERMO-CERAM. | 2″ to 12″Shaft Dia. | 0.015 @ 500 fpm | Ambient | None |
| Model 59 | Severe service assembled seal. Heavy duty metal outer case; reverse bevel lip design prevents lip rollover; aggressive shaft to bore misalignment capability. | 6″ to 90″Shaft Dia. | 0.090 @ 5000 fpm | To 50 psi | Molded Stainless Steel Finger |
| Model 59G1 | Severe service dual lip assembled seal. GYLON excluder lip for non-lubricated external conditions or corrosive external conditions. | 6″ to 40″Shaft Dia. | 0.010 | To 7 psi | Molded-in Stainless Steel Finger |
Models 61 to 63
Small shaft assembled seals from 0.250 inch, including the 150 psi Model 61 and the Model 63 dual lip family.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 61 | General purpose assembled seal for high pressure applications. | 0.438″ to 20″Shaft Dia. | 0.005 @ 2000 fpm | 150 psi | None |
| Model 62 | Assembled seal, solid design. Low speed service; excellent chemical resistance. | 0.437″ to 20″Shaft Dia. | 0.500 @ 2000 fpm | To 7 psi | Carbon Steel Garter |
| Model 63 | General purpose assembled seal. | 0.250″ to 3″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm0.005 @ 3000 fpm | To 7 psi | Stainless Steel Finger |
| Model 63F1 | General purpose dual lip seal. Felt excluder. | 0.250″ to 3″Shaft Dia. | 0.010 @ 1000 fpm | To 7 psi | Stainless Steel Finger |
| Model 63G1 | General purpose dual lip seal. GYLON excluder lip for non-lubricated external conditions or corrosive external conditions. | 0.250″ to 3″Shaft Dia. | 0.010 | To 7 psi | Stainless Steel Finger |
| Model 63R1 | General purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in one element only. | 0.250″ to 3″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm | To 7 psi | Stainless Steel Finger |
| Model 63R2 | General purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in both elements. | 0.250″ to 3″Shaft Dia. | 0.010 @ 500 fpm0.005 @ 1000 fpm | To 7 psi | Stainless Steel Finger |
| Model 63T2 | General purpose dual lip seal. Lips set in tandem configuration; used for retention and exclusion; spring in both elements. | 0.250″ to 3″Shaft Dia. | 0.010 @ 500 fpm0.005 @ 1000 fpm | To 7 psi | Stainless Steel Finger |
| Model 63TB | General purpose dual lip seal. Non-sprung front lip serves as a baffle; lips set in tandem configuration; used for retention and exclusion; spring in both elements. | 0.250″ to 3″Shaft Dia. | 0.010 @ 500 fpm0.005 @ 1000 fpm | To 7 psi | Stainless Steel Finger |
Models 64 to 68
Garter spring assembled seals, from the highest misalignment Model 64 to the compact 66, 67, and 68 families.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 64 | Severe service assembled seal. Heavy-duty metal outer case; unique carrier and Garter spring combination; industry's highest shaft to bore misalignment capability. | 8″ to 90″Shaft Dia. | 0.125 @ 5000 fpm0.093 @ 7000 fpm | To 7 psi | Combination Stainless Steel Garter and Stainless Steel Finger |
| Model 66 | General purpose assembled seal. Heavy duty metal outer case; Garter spring construction. | 0.375″ to 7.875″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm0.005 @ 3000 fpm | To 7 psi | Carbon Steel Garter |
| Model 66T2 | General purpose dual lip seal. Lips set in tandem configuration; used for retention and exclusion; spring in both elements. | 0.375″ to 7.875″Shaft Dia. | 0.010 @ 500 fpm0.005 @ 1000 fpm | To 7 psi | Carbon Steel Garter |
| Model 67 | General purpose assembled seal. Heavy duty lip construction. | 0.500″ to 3.250″Shaft Dia. | 0.010 @ 500 fpm0.005 @ 1000 fpm | To 7 psi | Carbon Steel Garter |
| Model 67R2 | General purpose dual lip seal. Dual lips oppose for exclusion and retention; spring in both elements. | 0.500″ to 3.250″Shaft Dia. | 0.010 @ 500 fpm0.005 @ 1000 fpm | To 7 psi | Garter |
| Model 68 | General purpose assembled seal. Heavy duty lip construction; Garter spring; filler ring construction for spring containment in severe conditions. | 0.500″ to 3.250″Shaft Dia. | 0.010 @ 1000 fpm | To 7 psi | Garter |
Bonded Seals
General purpose bonded seals with or without a Garter spring, for grease retention and contamination exclusion.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 71 | General purpose bonded seal. No spring; ideal for grease retention or contamination exclusion. | 0.250″ to 7.250″Shaft Dia. | 0.005 @ 1000 fpm | To 7 psi | None |
| Model 76 | General purpose bonded seal. Metal outer case; Garter spring construction. | 0.250″ to 8″Shaft Dia. | 0.015 @ 1000 fpm | To 7 psi | Carbon Steel Garter |
| Model 91 | General purpose bonded seal. No spring; ideal for grease retention or contamination exclusion. | 0.281″ to 5″Shaft Dia. | 0.005 @ 1000 fpm | To 7 psi | None |
| Model 92 | General purpose bonded seal. Metal outer case; Garter spring construction. | 0.250″ to 12.5″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm0.005 @ 3000 fpm | To 7 psi | Carbon Steel Garter |
| Model 94 | General purpose bonded seal. Metal outer case; dual lip design; Garter spring construction. | 0.438″ to 7.375″Shaft Dia. | 0.015 @ 1000 fpm0.010 @ 2000 fpm0.005 @ 3000 fpm | To 7 psi | Carbon Steel Garter |
Severe Service Seals
Models 87 and 88 with metal reinforced rubber OD and aggressive shaft to bore misalignment capability, 6 inch to 53 inch shafts.
| Model | Description & Features | Shaft Diameter | Misalignment & Runout | Pressure | Spring |
|---|---|---|---|---|---|
| Model 87 | Severe service seal. Metal reinforced rubber OD; reverse bevel lip design prevents lip rollover; aggressive shaft to bore misalignment capability. | 6″ to 48″Shaft Dia. | 0.100 @ 2500 fpm0.500 @ 5000 fpm | To 7 psi | Molded-in Carbon Steel Garter |
| Model 87NS | Severe service seal. No spring; ideal for grease retention or contamination exclusion; reverse bevel lip design prevents lip rollover. | 6″ to 53″Shaft Dia. | 0.050 @ 2500 fpm0.025 @ 5000 fpm | To 7 psi | None |
| Model 88 | Severe service seal. Aggressive shaft to bore misalignment capability; metal reinforced rubber OD for positive bore retention. | 6″ to 48″Shaft Dia. | 0.050 @ 2500 fpm0.025 @ 5000 fpm | To 7 psi | Molded-in Carbon Steel Garter |
| Model 88NS | Severe service seal. No spring; ideal for grease retention or contamination exclusion; reverse bevel lip design prevents lip rollover. | 6″ to 48″Shaft Dia. | 0.025 @ 2500 fpm0.012 @ 5000 fpm | To 7 psi | None |
Ratings are maximums for each model. Confirm limits for your specific shaft speed, media, temperature, and housing with an Anchor Seals Inc. representative.
Frequently Asked Questions
All Oil SealsWhat are Mill-Right N, ES, and V oil seals?
Mill-Right is the Garlock elastomer family used across the KLOZURE oil seal line. The N, ES, and V compounds deliver breakthrough anti-abrasion and anti-wear properties for extended service life and improved chemical resistance through the entire range of elastomers, and they are available in all elastomeric KLOZURE oil seal designs.
How do I read the misalignment and runout column?
Each figure is the allowable total shaft to bore misalignment plus dynamic runout, in inches, at the shaft surface speed shown in feet per minute. Allowable runout drops as speed rises, so check the figure at your actual operating speed. Models 59, 64, 87, and 88 carry the most aggressive misalignment capability in the line.
Which models are split, and why does that matter?
Models 151, 154, 154R1, 26, and 26NS are available in split designs, which install without removing bearings, couplings, or the shaft. That keeps repairs on large mill, paper machine, and power plant equipment to hours instead of days. Split reinforced rubber OD models require a cover plate.
What do the F1, G1, R1, R2, T2, and TB suffixes mean?
They describe the second lip. F1 adds a felt excluder, G1 a GYLON excluder lip for non-lubricated or corrosive external conditions, R1 opposed dual lips with a spring in one element, R2 opposed dual lips with springs in both, T2 tandem lips with springs in both, and TB a tandem configuration with a non-sprung front lip acting as a baffle.
